AI Controls
Controls
Intelligent systems that reduce energy another 30\u201340% beyond LED — while extending fixture life and eliminating manual management. Buildings that adjust automatically so you don’t have to.
What We Do
LED saves energy. Controls save even more.
We design and install intelligent control systems using Daintree (GE Current) and Synapse Wireless platforms. From standalone fixture-level sensors to networked building automation — matched to what your building actually needs.
Daintree ONE
Standalone sensor per fixture. No gateway, no subscription. Simplest path to savings.
Synapse SimplySnap
Mesh network for indoor + outdoor on one system. DLC NLC5.0 qualified.
BAS Integration
Connect controls to existing building automation. Single pane of glass for all systems.
How Controls Work
Four methods. One result: less waste.
Dimming
Reduce light output during unoccupied hours. Parking lots dim to 30% after 10 PM, then restore to 100% on motion detection.
Scheduling
Automated on/off based on time of day, season, and daylight. No more relying on photocells or manual switches.
Occupancy Sensing
Motion and presence detection at the fixture level. Lights respond to real use — not fixed assumptions.
BAS Integration
Connect lighting to your building automation system. Single dashboard for lighting, HVAC, and electrical monitoring.
Value Stack
$31.35 per fixture, per year.
Controls value goes beyond energy savings. Reduced thermal stress extends fixture life from 11.4 to 19.7 years — eliminating one full replacement cycle over 20 years.
$18.70
Energy savings per fixture/yr
155.8 kWh saved at $0.12/kWh
$9.65
Deferred replacement per fixture/yr
Fixture life extends from 11.4 to 19.7 years
$3.00
Reduced maintenance per fixture/yr
Fewer failures from lower thermal stress
Combined LED + Controls
Controls add $78/fixture, extend payback by only 0.3 years, and nearly double fixture lifespan.
2.9yr
Combined payback
19.7yr
Fixture life
Installed and verified.
- Controls strategy matched to building use
- Sensor and controller installation
- Scheduling and dimming configuration
- BAS integration where applicable
- Post-install energy verification
- Ongoing support and adjustments
Ready to go beyond LED?
See what controls can save your building.
Controls pair with new or existing LED installations. We will model the savings for your specific building before any commitment.